Product Details:
Payment & Shipping Terms:
|
| Voltage: | 220V 1phrase | Power Output: | 2.2kw 3hp |
|---|---|---|---|
| Motor Brand: | 50/60HZ | Current: | 13A |
| Grinding Width: | 280mm / 11” | Grinding Pressure: | 41KG / 90.2lbs |
| Net Weight: | 75KG / 165lbs | Additional Weight: | N / A |
| Dast Port: | ∅ 50mm | Motor Speed: | 1440rmp |
| High Light: | marble grinding and polishing machine,floor surface grinder |
||
Single Head Marble Floor Grinding Machine Surface For Sell
The floor grinder and floor edge grinder is in one!
HW-G1 combines floor grinder and floor edge grinder into one. The ergonomically design allows the worker stand straight behind the machine, reducing fatigue, backaches, job site injures.
This equipment covers more square feet in less time and less effect, maximizing comfort and increasing productivity.HW-G1 floor edge grinding machine is ideal for removing the paint, thin set, adhesives, VCT, mastic and epoxy coating on floor; the flaoting cover allows the grinder float across the floor surface like ball on the ice, eliminating the suction lock and capturing most of the dust.
Parameters
| Model | HW-G1 |
| Voltage: | 220V 1phrase |
| Power output: | 2.2KW,3hp |
| Motor Brand: | China Winder |
| Frequency: | 50/60HZ |
| Current: | 13A |
| Grinding Width: | 280mm/11” |
| Grinding Pressure: | 41KG/90.2lbs |
| Additional Weight: | N/A |
| Dust Port: | Φ50mm |
| Motor Speed: | 1400rmp |
| Diamond Pad Holder: | 6 Pieces |
| Machine L*W*H: | 1100*420*1000mm |
| Net Weight: | 75KG/165lbs |
Features
1, Removable cover lid and brush make edge grinding easily and conveniently-just loose the screws;
2, The triangle design of stamping part assures the stability and balance of grinding plate; the diamond pad on the plate would not loose balance;
3, Unlike the fixed cover, the floating cover could fellow floor profiles, up and down, eliminating the suction lock and capturing 99% of dust;
Closer Look
Comparison
After Sell Service
FAQ
Q: If the floor edge grinder could grind floor?
A: Yes, it can; its grinding width is 280mm and its grinding pressure is 90.2 lbs;
Q: If HW-G1 could grind floor edge and leaves no margin at all?
A: G1 could grind floor edge, but leaves margin of 2mm, which is the narrowest margin which the floor edge grinder could achieve. It is impossible for any machine to leave margin 0mm.
Q: If HW-G1 could grind right edge and left edge?
A: Yes. It can; the two sides could grind floor edge;
Q: How about the floating cover of HW-G1?
A: The floating cover follow floor up and down, preventing dust from entering work site.
Contact Person: manli
Tel: +8613077380137
